Code Description Price euro/1000 % Price Change 1 2 Package A B C D E F gr 006 5042 240 04 MP 06- 5- 4 CAPP.240 83,00 + 60% - 250 10.8  12.2  6

Colour Colour number green 240   (XXX XXXX XXX XX) Colour description green Matches pastel green. Matches: Roughly matches RAL colour 60199 Featured colours reserved. Due to the screen, differences in colour may occur.

Material Material nr polyethylene Hd - PE 04    (XXX XXXX XXX XX) General informations: High pressure Polyethylene is resistant to chemicals. Therefore especially suitable for coverplugs and caps. The material is a little less than low pressure Polyethylene, yet has a better scratch firmness. Does not take in moisture, therefore very well insulating electrically. Polyethylene can not be glued and burns on after lighting it. Features Chimical resistance feature DIN Resistance to Valutation Relative density gr/cm3 0,95 Tensile strength MN/m2 24 Elongation at break % 350 Tensile modulus MN/m2 1000 Notched impact strength kJ/m2 3 Ball indentation MN/m2 25 Application temperature max °C 80 Volume resistivity cm 10^15 Dissapation factor tan. 103 Hz 0,001 Dielectric strength MV/m 53 Flammability UL94 > 1,6 mm - Coefficient of friction (on steel) 0,25-0,3 Petrol A Benzene A Mineral oils A Vegetable oils A Weak alkalis A Strong alkalis A Weak acids A Strong acids B A = good B = doubtful C = poor   All data are indicative

Technical informations are indicative and can be updated.
Copyright Gandini Fasteners S.r.l. All rights reserved. No part of this web site may be reproduced in any form without express permission.

GANDINI FASTENERS SRL viale Pier Paolo Pasolini, 83 - 20099 Sesto S.Giovanni Milano Italy
Tel. +39 02 241 047 250 Fax +39 02 241 047 74